27He also made ten movable stands of bronze; each was four cubits long, four wide and three high. That is, about 6 feet long and wide and about 4 1/2 feet high or about 1.8 meters long and wide and 1.4 meters high
28This is how the stands were made: They had side panels attached to uprights.
29On the panels between the uprights were lions, bulls and cherubim—and on the uprights as well. Above and below the lions and bulls were wreaths of hammered work.
30Each stand had four bronze wheels with bronze axles, and each had a basin resting on four supports, cast with wreaths on each side.
31On the inside of the stand there was an opening that had a circular frame one cubit That is, about 18 inches or about 45 centimeters deep. This opening was round, and with its basework it measured a cubit and a half. That is, about 2 1/4 feet or about 68 centimeters; also in verse 32 Around its opening there was engraving. The panels of the stands were square, not round.
32The four wheels were under the panels, and the axles of the wheels were attached to the stand. The diameter of each wheel was a cubit and a half.
33The wheels were made like chariot wheels; the axles, rims, spokes and hubs were all of cast metal.
34Each stand had four handles, one on each corner, projecting from the stand.
35At the top of the stand there was a circular band half a cubit That is, about 9 inches or about 23 centimeters deep. The supports and panels were attached to the top of the stand.
36He engraved cherubim, lions and palm trees on the surfaces of the supports and on the panels, in every available space, with wreaths all around.
37This is the way he made the ten stands. They were all cast in the same molds and were identical in size and shape.
THE HOLY BIBLE, NEW INTERNATIONAL VERSION®, NIV® Copyright © 1973, 1978, 1984, 2011 by Biblica, Inc.® Used by permission. All rights reserved worldwide.